QSFP28-100G-ER4
NNQ-100G-ER4
QSFP28 100G, 1340nm, 40km, ER4, Single Mode
Short Description
QSFP28 100Gb/s ER4 QSFP28 100G, 1340nm, 40km, ER4 Single Mode
Applications:
- 100GBASE-ER4 Ethernet Links
- Infiniband QDR and DDR interconnects
This NETRO NN-QSFP28-100G-ER4 This product is a 100Gb/s transceiver module designed for optical communication applications compliant to Ethernet IEEE 802.3ba standard. The module converts 4 input channels of 25Gb/s electrical data to 4 channels of LAN WDM optical signals and then multiplexes them into a single channel for 100Gb/s optical transmission. Reversely on the receiver side, the module de-multiplexes a 100Gb/s optical input into 4 channels of LAN WDM optical signals and then converts them to 4 output channels of electrical data.
The central wavelengths of the 4 LAN WDM channels are 1295.56, 1300.05, 1304.58 and 1309.14 nm as members of the LAN WDM wavelength grid defined in IEEE 802.3ba standard. The high performance cooled LAN WDM DFB transmitters and high sensitivity APD receivers provide superior performance for 100Gigabit applications up to 30km links and compliant to optical interface with 100GBASE-ER4 lite requirements.
The product is designed with form factor, optical/electrical connection and digital diagnostic interface according to the NETRO NN-QSFP28-100G-ER4 Multi-Source Agreement (MSA). It has been designed to meet the harshest external operating conditions including temperature, humidity and EMI interference.
Absolute Maximum Ratings
The operation in excess of any absolute maximum ratings might cause permanent damage to this module.
Parameter | Symbol | Min | Max | Unit | Notes |
Storage Temperature | TS | -40 | 85 | degC |
|
Operating Case Temperature | TOP | 0 | 70 | degC |
|
Power Supply Voltage | VCC | -0.5 | 3.6 | V |
|
Relative Humidity (non-condensation) | RH | 0 | 85 | % |
|
Damage Threshold, each Lane | THd | -3 |
| dBm |
|
Recommended Operating Conditions and Power Supply Requirements
Parameter | Symbol | Min | Typical | Max | Unit | Notes |
Operating Case Temperature | TOP | 0 |
| 70 | degC | Operating Case Temperature |
Power Supply Voltage | VCC | 3.135 | 3.3 | 3.465 | V | Power Supply Voltage |
Data Rate, each Lane |
|
| 25.78125 |
| Gb/s | Data Rate, each Lane |
Control Input Voltage High |
| 2 |
| Vcc | V | Control Input Voltage High |
Control Input Voltage Low |
| 0 |
| 0.8 | V | Control Input Voltage Low |
Link Distance with G.652 | D | 0.002 |
| 30 | km | Link Distance with G.652 |
Electrical Characteristics
Parameter | Test Point | Min | Typical | Max | Unit | Notes |
Power Consumption |
|
|
| 4 | W |
|
Supply Current | Icc |
|
| 1.21 | A |
|
Single-ended Input Voltage Tolerance (Note 1) |
| -0.3 |
| 4.0 | V | Referred to TP1 signal common |
AC Common Mode Input Voltage Tolerance |
| 15 |
|
| mV | RMS |
Differential Input Voltage Swing Threshold |
| 50 |
|
| mVpp | LOSA Threshold |
Differential Input Voltage Swing | Vin,pp | 190 |
| 700 | mVpp |
|
Differential Input Impedance | Zin | 90 | 100 | 110 | Ohm |
|
Single-ended Output Voltage |
| -0.3 |
| 4.0 | V | Referred to signal common |
AC Common Mode Output Voltage |
|
|
| 7.5 | mV | RMS |
Differential Output Voltage Swing | Vout,pp | 300 |
| 850 | mVpp |
|
Differential Output Impedance | Zout | 90 | 100 | 110 | Ohm |
|
Notes: The single ended input voltage tolerance is the allowable range of the instantaneous input signals
Optical Characteristics
Parameter | Symbol | Min | Typical | Max | Unit | Notes |
Wavelength Assignment | L0 |
1294.53 |
1295.56 |
1296.59 |
nm |
|
L1 |
1299.02 |
1300.05 |
1301.09 |
nm |
| |
L2 |
1303.54 |
1304.58 |
1305.63 |
nm |
| |
L3 |
1308.09 |
1309.14 |
1310.19 |
nm |
| |
Transmitter | ||||||
Side Mode Suppression Ratio | SMSR | 30 |
|
| dB |
|
Total Average Launch Power | PT |
|
| 10.5 | dBm |
|
Average Launch Power, each Lane | PAVG | -1.9 |
| 4.5 | dBm |
|
OMA, each Lane | POMA | 0.1 |
| 4.5 | dBm | 1 |
Difference in Launch Power between any Two Lanes (OMA) | Ptx,diff |
|
| 3.6 | dB |
|
Launch Power in OMA minus Transmitter and Dispersion Penalty (TDP), each Lane |
|
-0.65 |
|
|
dBm |
|
TDP, each Lane | TDP |
|
| 2.5 | dB |
|
Extinction Ratio | ER | 4.5 |
|
| dB |
|
Optical Return Loss Tolerance | TOL |
|
| 20 | dB |
|
Transmitter Reflectance | RT |
|
| -12 | dB |
|
Eye Mask{X1, X2, X3, Y1, Y2, Y3} |
| {0.25, 0.4, 0.45, 0.25, 0.28, 0.4} |
|
|
|
|
Average Launch Power OFF Transmitter, each Lane | Poff |
|
| -30 | dBm |
|
Receiver | ||||||
Damage Threshold, each Lane | THd | -3 |
|
| dBm | 3 |
Total Average Receive Power |
|
|
| 3 | dBm |
|
Average Receive Power, each Lane |
| -14.7 |
| -4.9 | dBm | for 25km Link Distance |
Average Receive Power, each Lane |
| -17.7 |
| -4.9 | dBm | for 30km Link Distance |
Receive Power (OMA), each Lane |
|
|
| -1.9 | dBm |
|
Receiver Sensitivity (OMA), each Lane | SEN |
|
| -13.45 | dBm | for BER = 1x10-12 |
Stressed Receiver Sensitivity (OMA), each Lane |
|
|
|
-11.45 |
dBm |
for BER = 1x10-12 |
Receiver Sensitivity (OMA), each Lane | SEN |
|
| -16.45 | dBm | for BER = 5x10-5 |
Stressed Receiver Sensitivity (OMA), each Lane |
|
|
|
-14.45 |
dBm |
for BER = 5x10-5 |
Receiver Reflectance | RR |
|
| -26 | dB |
|
Difference in Receive Power between any Two Lanes (OMA) | Prx,diff |
|
| 5.5 | dB |
|
LOS Assert | LOSA |
| -26 |
| dBm |
|
LOS Deassert | LOSD |
| -24 |
| dBm |
|
LOS Hysteresis | LOSH | 0.5 |
|
| dB |
|
Receiver Electrical 3 dB upper Cutoff Frequency, each Lane | Fc |
|
| 31 | GHz |
|
Conditions of Stress Receiver Sensitivity Test (Note 5) | ||||||
Vertical Eye Closure Penalty, each Lane |
|
| 1.5 |
| dB |
|
Stressed Eye J2 Jitter, each Lane |
|
|
0.3 |
|
UI |
|
Stressed Eye J9 Jitter, each Lane |
|
| 0.47 |
| UI |
|
Notes:
- Even if the TDP < 1 dB, the OMA min must exceed the minimum value specified here.
- See Figure 1 below.
- The receiver shall be able to tolerate, without damage, continuous exposure to a modulated optical input signal having this power level on one lane. The receiver does not have to operate correctly at this input power.
Vertical eye closure penalty and stressed eye jitter are test conditions for measuring stressed receiver sensitivity. They are not characteristics of the receiver.
- Hot pluggable QSFP28 MSA form factor
- Compliant to Ethernet 100GBASE-ER4 Lite and OTN OTU4 4L1-9C1F Lite
- Up to 25km reach for G.652 SMF without FEC
- Up to 30km reach for G.652 SMF
- with FEC
- Single +3.3V power supply
- Operating case temperature: 0~70℃
- Transmitter: cooled 4x25Gb/s LAN WDM TOSA (1295.56, 1300.05, 1304.58, 1309.14nm)
- Receiver: 4x28Gb/s APD ROSA
- 4x28G Electrical Serial Interface (CEI-28G-VSR)
- Maximum power consumption 4W
- Duplex LC receptacle
- RoHS-6 compliant
