NNA-100G QSFP28 AOC
NNA-QSFP28 100G AOC
100G QSFP28 Active Optical Cable (AOC)
Short Description
Application:
- Low-latency and high-speed interconnections for high performance computing (HPC)
- 100G Ethernet
- Other high-throughput data transmission network
Standard:
- Compliant with IEEE 3ba-2010,Annex 86A for 40GBASE-SR4
- Compliant with InfiniBand QDR,DDR,SDR
- Compliant with QSFP MSA(SFF-8436)
- ROHS Compliant: lead-free
The NETRO's NNA-100G-5M series are active optical cables(AOC) that allows bi-directional 100Gbps transmission suitable for high performance computing (HPC) clustering and other high-throughput data network, with advantages such as high speed, high density, low latency, low power consumption and light weight.
Absolute maximum ratings:
Parameter | Conditions | Min | Max | Units |
Power supply voltage at 3.3V |
| -0.5 | 3.75 | V |
Voltage on I/O pads |
| -0.5 | VDD+0.5 | V |
Differential Input Swing |
|
| 1.5 | Vpp |
Storage temperature | Non-condensing | -40 | 85 | Celsius |
Powered case temperature range | Non-condensing | -5 | 70 | Celsius |
Relative Humidity |
| 5 | 85 | % |
Static discharge voltage on high speed pins | Human body model |
| 500 | V |
Static discharge voltage on other pins | Human body model |
| 2000 | V |
Air discharge to QSFP case | EN61000-4-2 Criterion B Test |
| 15 | kV |
Contact discharge to QSFP case | EN61000-4-2 Criterion B Test |
| 8 | kV |
Recommended Operating Conditions:
Parameter | Conditions | Min | Typ. | Max | Units |
Data rate per lane | 8B/10BCoding, 64B/66B Coding | 1 | 10.3125 | 10.5 | Gbps |
3.3V Supply Voltage |
| 3.13 | 3.3 | 3.47 | V |
Power supply noise including ripples | 1kHz to frequency of operation mersured at VCC_HOST |
|
|
50 |
mVpp |
Case temperature |
| 0 | 35 | 70 | Celsius |
Transmitter Specifications (Electrical):
Symbol | Parameter | Specification value. | Unit | Note |
X1,X2 | Eye mask parameter,time | 0.11,0.31 | UI | At FDR,EDR rates See Figure 1 |
Y1,Y2 | Eye mask parameter,voltage | 95,350 | mV | |
X | Eye mask parameter,time | 0.15 | UI | At SDR,DDR rates See Figure 2 |
Y1,Y2 | Eye mask parameter,voltage | 250,600 | mV |
Symbol | Parameter | Min | Typical | Max. | Unit | Notes |
DDPWS | Data Dependent pulse Width Shrinkage |
|
| 0.11 | UI |
|
J2 |
J2 jitter tolerance |
|
| 0.19 | UI | With TX CDR bypassed (i.e., disabled) |
|
| 0.44 | UI | With TX CDR enabled | ||
J9 |
J9 jitter tolerance |
|
| 0.34 | UI | With TX CDR bypassed (i.e., disabled) |
|
| 0.69 | UI | With TX CDR enabled | ||
SDD11 | Differential input return loss |
|
|
| dB | See Equation 1 & Figure 3 |
SCC11 | Common mode input return loss |
|
| -2 | dB |
|
SDC11 | Common mode to differential reflection |
|
|
| dB | See Equation 2 & Figure 4 |
| Skew between channels |
|
| 50 | ps | Skew resulted from module. |
Features:
- Quad Small Form-factor Pluggable (QSFP)
- Maximum Aggregate Data Rate 100Gbps
- EDR, FDR, QDR, DDR, SDR (Infiniband)
- 10/25/40/100G Ethernet
- Bi-directional parallel link
- BER<1e-12 From 0 to 50 degree case temp
- CDR no/off automatically
- 10/14/25/28Gb/s per lane, x4 channels
- Up to 70m (OM3)
- Up to 100m (OM4)
- Low power consumption
- Round multi-mode fiber array
- 850nm VCSEL four array
- PIN diode four array
- Hot Pluggable
- 12C management interface
- 3V power supply voltage
- Maximum 2W power consumption
